Powder fire extinguishers charged with a fire extinguishing and pumped with a gas (air, nitrogen) to a pressure of 16 atm. Designed to extinguish fires of Class A, B, C, or BC, depending on the type of powder, and electrical installations under voltage up to 1000 volts. Provided with a locking device, providing free opening and closing with a simple hand movement. The manometer set on the head of the fire extinguisher and showing the degree of efficiency is a big advantage over the fire extinguishers with integrated pressure source. Operated at temperatures ranging from -20 to +50°C. Recharge - once every five years.
The growth of consumers of these extinguishers caused several advantages of these models in comparison with other types, namely:
- High fire extinguishing capability;
- Versatility (the ability to extinguish fires of different classes);
- The ability to extinguish electrical equipment under voltage up to 1000 V;
- Wide operating temperature range: -20 to + 50°C;
- Ease of use;
Extinguisher ОП-2(з), 3(з), 4(з), 5(з), 6(з), 8(з), 10(з), 100(з) Fire extinguisher ОП-8(б).
The fire extinguisher is designed for extinguishing of various combustibles that can’t combust without air, on the industrial plants, vehicles, electrical installations under voltage not exceeding 1000V, in museums, galleries, archives.
They are also intended to extinguish liquid and gaseous substances (Class B, C). Recommended for extinguishing of electrical installations with voltage up to 1000V. It has a compact size and can be conveniently placed anywhere in the room, as it can be attached to the wall using an additional fastener which is sold in our company. Filled with a carbon dioxide that does not leave contaminants. Requires recharging once every five years, as well as control weighing - once a year to eliminate leaks. Carbon dioxide fire extinguishers should not be installed near heaters and under direct sunlight. Fire extinguishers have not passed control weighing or expired need to be recharged.
Extinguisher ОУ - 2, 3, 4, 5, 6, 8, 10, 20, 25, 40, 80.
GETEKS - hose with internal waterproofing layer. The most promising for use in fire protection units are hoses, manufactured by technology GETEKS. The hose is manufactured with a diameter from 19 to 150 mm. The layer of high impermeable material is used under manufacturing of these hoses. It provides a smooth water repellent surface inside the hose. GETEKS sleeve is resistant to weathering and is the unrivaled leader in the world among other types of fire hoses. Fire hose with a diameter of 19 mm for the firefighting inside the apartment.
|1. Inner diameter, mm||51+2|
|2. Hose length in roll, m||20±1|
|for hoses with diameter from 51 mm to 150 mm|
|3. Work pressure, MPa, not less|
|for hoses with diameter from 51 mm to 77 mm||1,6|
|for hoses with diameter 150 mm||1,2|
|4. Test pressure, MPa, not less,|
|for hoses with diameter from 51 mm to 77 mm||2,0|
|for hoses with diameter 150 mm||1,5|
|5. Bursting pressure, MPa, not less,|
|for hoses with diameter from 51 mm to 77 mm||3,5|
|for hoses with diameter 150 mm||2,4|
|6. Temperature of coatings brittleness for temperate climate °С, not more||-40|
|7. Internal bond strength of the coating layer with the fabric of the frame|
|under rupture (adhesion) to the strip width 50mm N(kg/cm), not less:||50 (0,5)|
|8. The thickness of the inner coating, mm, not less||0,5|
|9. Hose weight, length 1m, kg, not more|
|for hoses with diameter 51 mm.||0,3|
|for hoses with diameter 66 mm.||0,35|
|for hoses with diameter 77 mm.||0,45|
|for hoses with diameter 150 mm.||0,95|
|10. Hose elongation at working pressure, %, not more||5|
|11. The relative increase of diameter at working pressure, %, not more||5,0|
|12. Resistance to abrasion, cycles, not less (for hoses with diameter 51 mm)||40|
|13. Resistance to contact burns of hoses|
|temperature 450°С+10°С, not less||3|
Fire hoses produced on technology "Sibteks" designed for a complete and equipment of interior and exterior fire hydrants and portable motto pumps for water supplying, water solutions, frothers and other fire extinguishing substances at a distance under pressure. The hose is produced with a diameter of 51 mm and 66 mm. The layer of high-quality waterproof material is used under manufacturing of these hoses. It provides a smooth water repellent surface inside the hose. Hose "Sibteks" is resistant to weathering.
|1. Inner diameter, mm||51+2; 66±2|
|2. Hose length in roll, m||20±1|
|3. Work pressure, MPa||1,0|
|4. Test pressure, MPa, not less||1,25|
|5. Bursting pressure, MPa, not less||2,0|
|6. Temperature of brittleness, not more||-50|
|7. Internal bond strength of the coating layer with the fabric of the frame under rupture (adhesion) to the strip width 50mm N(kg/cm), not less:||1,0|
|8. Hose weight, length 1m, kg, not more||0,35|
|9. Hose elongation at working pressure, %, not more||5,0|
|10. The relative increase of diameter at working pressure, %, not more||5,0|
|11. Resistance to abrasion, cycles, not less||100|
|12. Resistance to contact burns of hoses temperature 450°С+10°С, seconds, not less,||3|