Our partners

  • «Kamsko-Volzhskoe akcionernoe obshestvo rezinotekhniki» JSC
  • «Saranskrezinotechnika» JSC
  • «Zavod «Sybgidral» Ltd.
  • «Uralskiy Zavod Elastomernykh Uplotneniy» JSC
  • Semperflex Optimit
  • Sel

  • Dealer certificates
    ← back

    Air ducts Stron Flex

    Flexible air duct Stron Clip FV

    Applying:

    • Transporting of highly corrosive fluids;
    • Removal of chemical vapors from the galvanic baths;
    • Hoods from laboratory tables, cabinets and other furniture;
    • In the medical, pharmaceutical, food and chemical industry;
    • Exhaust of paint aerosols, solvents.

    Material:

    • wall: two-layer, the outer layer - polyester fabric PVC-coated an inner layer of PTFE tape, PTFE tape (Teflon)
    • External helix: Galvanized steel.

    Characteristics:

      • Possesses exceptional chemical inertness against almost all aggressive media, good resistance to chemicals;
      • hermetic from gas, resistant to compression, tension. Very flexible, resistant to UV and ozone;
      • The inner wall surface with adhering surface;
      • External steel spiral protects against wear.

    Parameters

    The wall thickness between the spirals

    0,4 мм

    Standard

    Diameter

    50-500

    Colour

    Grey, white inside

    Standard length

    3м и 6 м

    Operating temperature range

    Normal regime

     from -40оС to +100оС

    Short

     to +120оС

    Flexible duct STRON PU-500

    Used for: Transportation of abrasives (chips, sawdust, pellets, ecowool, dust, powder, fibers), removal of vapors containing oil. Suitable for the food, chemical industry, wood processing, waste water treatment systems.

    Material 100% polyurethane, transparent, 500mkm reinforced with steel wire. Frost. Resistant to compression, tension, shock resistant. Very flexible, small bending radius.

    Parameters

    The wall thickness between the spirals

     0,5 мм

    Standard:

    Diameter

     40 - 1000 мм

    Colour

      transparent

    Standard length

     10 м

    Operating temperature range

    Normal regime

     from -40оС to +90оС

    Short

     to +100оС

    Flexible duct STRON PU-1000

    Used for: Transportation of materials with high abrasive (sawdust, wood chips, pellets, grain); industrial systems of aspiration; transportation of bulk materials; gases; removal of chemical vapors. For transportation of liquids without pressure.

    Материал 100% полиуретан, прозрачный, усиленный 1000мкм, армированный стальной спиралью.  Material 100% polyurethane, transparent, reinforced 1000mkm reinforced with steel wire. Frost. Resistant to compression, tension, shock resistant. Flexible.

    Parameters

    The wall thickness between the spirals

     1 мм

    Standard:

    Diameter

     75 - 600 мм

    Colour

     transparent

    Standard length

     6 м 10м

    Operating temperature range

    Normal regime

     from -40оС to +90оС

    Short

     to +100оС

    Flexible duct StronClip PO-500

    Used for:

    • transportation of abrasive materials, gaseous media;
    • industrial ventilation and air conditioning;
    • transportation of chips, bulk materials, paper and textile fibers;
    • dust extraction;
    • suction of chemical fumes.

    Does not contain PVC;

    Material:

    • Wall: polyolefin tape.
    • External helix: Galvanized steel

    Parameters

    The wall thickness between the spirals

    0,5мм

    Standard:

    Diameter

    40-900

    Colour

    transparent

    Standard length

    6 м

    Operating temperature range

    Normal regime

     from -60оС to +70оС

    Short

     to +80оС

    Screw clamp with bridge StronFix

    Suitable for installation of flexible ducts, joining spirally wound ducts to the flanges, nipples, suction nozzles, a bundled adapters, etc.

    Material: Stainless steel.

    Ample and secure fit due to special profile "bridge";

    Reuse;

    Easy to install;

    The width of the clamp: 9 mm - 12 mm; A range of standard diameters from 40 mm to 315 mm.